How to Disable or Remove Ally Integration

This guide shows you how to temporarily disable or permanently remove the integration between Ally and Leanheat Monitor. Disabling lets you pause integration without deleting it, while removing completely disconnects the systems.

Understanding the Difference

Disable Integration: Temporarily pauses the connection. Your integration settings remain saved. You can re-enable anytime by clicking "Enable" in the Ally App.

Remove Integration: Permanently deletes the connection. You'll need to create a new integration and generate a new pairing code if you want to reconnect later.

Disable Ally Integration

Follow these steps to temporarily disable integration.

Step 1: Navigate to Data Integration in Ally App

You have two navigation paths (choose either):

Path A:

1. Open Ally App
2. Tap Me (bottom navigation)
3. Tap Home Management
4. Select the integrated Home
5. Tap Data integration

Path B:

1. Open Ally App
2. Tap the current Home name (top of screen)
3. Tap Home Management
4. Select the integrated Home
5. Tap Data integration

Step 2: Disable the Integration

1. Tap Leanheat Monitor enabled
2. Tap Disable
3. You'll see the integration status change to Disabled

Step 3: Verify in Leanheat Monitor

1. Open Leanheat Monitor
2. Go to Admin → Ally™
3. You'll see the integration status shows Disabled

What Happens When Disabled

• Leanheat Monitor loses control of devices
• You regain full control in the Ally App
• Current temperature setpoints remain unchanged
• Devices continue to operate with their last settings
• You can re-enable anytime without creating a new integration

Re-enabling Integration

To turn integration back on:

1. Return to Data Integration in Ally App
2. Tap Leanheat Monitor disabled
3. Tap Enable
4. Integration resumes immediately

Remove Ally Integration

Follow these steps to permanently remove integration.

Step 1: Remove from Ally App

1. Navigate to Data Integration in Ally App (see navigation paths above)
2. Tap Leanheat Monitor enabled
3. Tap Remove
4. Confirm removal when prompted
5. Integration disappears from your Data Integration list

Step 2: Remove from Leanheat Monitor

1. Open Leanheat Monitor
2. Go to Admin → Ally™
3. You'll see the integration status shows Deleted
4. Click the trash icon next to the integration
5. Click Confirm
6. Integration is now completely removed from Leanheat Monitor

What Happens When Removed

• All connection between systems is severed
• Ally App regains full device control
• Devices remain in Leanheat Monitor but show as offline/disconnected
• You can manually delete devices from Leanheat Monitor if desired
• Integration settings, alarms, and classifications are not automatically deleted

Clean Up After Removal (Optional)

If you've removed integration and want to clean up Leanheat Monitor:

Remove Devices

1. Go to Device Administration
2. Filter for Ally devices (use device tags or search)
3. Select devices you want to remove
4. Click the trash icon for each device
5. Confirm deletion

Delete Alarm Rules

Any alarm rules created for Ally devices will remain. Delete them manually if no longer needed.

Delete Area Structures

If you created areas specifically for Ally devices, navigate to Areas and delete the structures if no longer needed.

Reconnecting After Removal

If you removed integration and want to reconnect:

1. Follow the full integration setup process again
2. Create a new integration in Leanheat Monitor (generates new pairing code)
3. Enable the new integration in Ally App
4. Import devices again

You'll need to reconfigure any device classifications, area assignments, and alarms.